GlassCell Isofab Inc.

Thermal Insulation: Polyisocyanurate, Polyurethane


Polyisocyanurate (commonly known as PIR, Polyiso or Iso) is a well proven and very efficient thermal insulation. It can be used in a multitude of applications in commercial, industrial and institutional construction. Polyiso offers the highest 'R' value per inch of thickness and offers the best cost/benefit value of all insutions. Different facings are available to increase the moisture resistance of the base products and the service temperature of most porducst is between -100°F to 250°F.

Polyurethane (PUR, urethane) has generally been replaced where more stringent fire ratings have been required.


TRYMER™ PIPE, SEGMENTS & FITTINGS

Trymer™ polyisocyanurate pipe insulation - closed-cell, high-performance insulation with one of the lowest ambient k-factors among all pipe insulations. Produced in a selection of densities and compressive strengths for a broad range pipe, vessel, equipment and duct applications, fabricated by GCI. Trymer insulation has excellent dimensional stability. Service temperature range: -297°F to +300°F (-183°C to +149°C). 2000XP is our standard Trymer product, but we can also supply other densities.

Click here to view other available densities.

DATA SHEET: View, 2000 XP

MSDS SHEET: View


DOW

SARAN™ VAPOR RETARDER FILM AND TAPE

Saran™ Vapor Retarder Film and Tape are durable, flexible polyvinylidene chloride (PVDC) jacketing materials for mechanical insulation systems. This high-performance, cost-effective vapor retarder system helps prevent water absorption and resists moisture vapor drive into the insulation, even at elbows and fittings. Saran Vapor Retarder Film and Tape are ideal for low-temperature applications such as food and beverage facilities, hydronic piping and HVAC systems, transport pipelines, chemical condensation tanks, cold-storage systems, refrigerated transport and chilled water systems.

DATA SHEET: 540VRF, 520VRT,560VRF, 560VRT

MSDS SHEET: None


DOW

AP FOIL FACED

Johns Manville AP Foil-faced sheathing board is composed of a uniform closed cell polyisocyanurate foam core bonded on each side to a trilaminate foil facer. One side has a foil reflective facer and the other side has a non-reflective foil facer, depending on your building needs. AP is now produced with a non-HCFC blowing agent, meeting the latest environmental regulations for using chemicals that do not harm the protective ozone layer in the earth's atmosphere. The new formula enhances the positive environmental profile for this energy-saving product.

DATA SHEET: View

MSDS SHEET: View


Johns Manville

E'NRG'Y 2 OEM FOAM INSULATION

OEM E'NRG'Y 2 is a rigid, closed cell polyisocyanurate foam board with a facing on both sides. The superior insulating properties of polyisocyanurate produces a high degree of insulating efficiency. This makes E'NRG'Y 2 an ideal insulation for factory manufactured composite wall systems and other OEM applications requiring high thermal performance (where a 25/50 flame and smoke rating is not required). OEM E'NRG'Y 2 is light weight, making it easy to handle and install. It can be easily cut with a knife or saw.

DATA SHEET: View

MSDS SHEET: View


Johns Manville

HANDI-FOAM SEALANT

Handi-Foam® Sealants are designed to seal, fill and insulate small cracks, gaps and voids. Handi-Foam® sealants can be applied with a straw applicator, a professional dispensing unit or a professional hose kit (for use with cylinders). Handi-Foam® Sealants are available in a variety of sizes to meet many application needs. This results in less waste on small jobs while having an economic impact on large jobs.

DATA SHEET: None

MSDS SHEET: View


Fomo Products, Inc.

HANDI-FOAM 1 COMPONENT FOAM

Handi-Foam ® Cylinder Foam is a multiple purpose, UL classified polyurethane foam designed within the international guidelines for protection of the ozone layer, and with respect to the Montreal Protocol, 1987 and other environmental guidelines, utilizing a non-flammable blowing agent to assist in the safety of the end user. It is designed for the professional user, and dispensed through a flexible hose with a valve controlled dispensing nozzle. For added control, it may be used with a reusable one-component dispensing unit.

DATA SHEET: View

MSDS SHEET: View


Fomo Products, Inc.

HANDI-FOAM SPRAY FOAMS 2 COMP.

Handi-Foam® 2 Component Spray Foams are designed to fill and insulate large voids and surfaces. Handi-Foam® Spray Foams are dispensed using the patented Handi Gun® Dispensing Unit for accurate and precise applications. Handi-Foam® Spray Foams are available in a variety of sizes, from small aerosol kits to large refillable systems.

DATA SHEET: View

MSDS SHEET: View


Fomo Products, Inc.

ACCESSORIES

Not sure of how many one or two components you need? Please click here to find out.


HANDI-CLEANER

Multipurpose Handi-Cleaner is a spray solvent used to dissolve uncured foam. Handi Cleaner can also be attached to any of Fomo's sealant dispensing units, allowing the unit to be flushed and kept clean and operable. Handi-Cleaner may also be used for other industrial cleaning purposes.

DATA SHEET: View

MSDS SHEET: View


Fomo Products, Inc.

ONE COMPONENT DISPENSING UNITS

One component dispensing units are used with Handi-Foam® Gun Foam, Handi-Stick® Adhesives, and Handi-Seal® Window and Door Sealant. The cans screw easily into the unit's adapter, allowing for increased flow and metering control. Handi-Foam® Polyurethane Cleaner should be used to keep the units in good working condition. Our Steel Dispensing Units our built to withstand the rigors of construction; choose the 22" gun for subfloor and hard to reach applications.

The Convertible Dispensing Unit is intended for professionals who use both gun foam and cylinder foam. The Convertible Dispensing Unit has a bottom threaded opening for optional attachment of cylinder foam hoses. Fomo's Polymer Dispensing Unit is our least expensive unit intended for limited reuse.

DATA SHEET: None

MSDS SHEET: None


Fomo Products, Inc.

TWO COMPONENT DISPENSING UNITS

Comes standard with many of the two-component disposable kits and all of our refillable sets. The Handi-gun offers the highest flow rate available, convenient nozzle attachments, responsive trigger for accurate metering and solvent resistant cleanable nozzles.

DATA SHEET: None

MSDS SHEET: None


Fomo Products, Inc.